S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Install:
-
the ignition coils and ignition cables according to earlier markings.
-
the ignition coils' ground cable.
-
the camshaft position sensor.
Lay the cable channel and cable harness in place.
Install:
-
the cable channel's screws on the cylinder head's trailing edge and the throttle housing's console.
-
console between inlet pipe and servo pump.
-
injectors' connectors.
-
water temperature sensor's connector.
-
air preheating hose between air filter and exhaust manifold's heat shield plate.
-
the auxiliaries belt
-
the pipe screw for the water-heated crankcase ventilation.
-
air filter housing's top part complete with hose.
-
EVAP-valve's connection to mass air flow sensor's hose.
-
the mass air flow sensor's connector.
-
the turbo control valve on the air filter housing.
-
brake servo's vacuum hose.
-
throttle cable.
-
the inlet hose between mass air flow sensor and throttle housing.
-
the front timing cover.
-
the cover over the ignition coils.
-
the upper timing cover
-
the cover over the throttle housing.
-
the cover over the injectors
Fuel line, installing
