S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
-
Use universal puller 998 6187 UNIVERSAL PULLER 100 See: Tools and Equipment/998 6187 Universal Puller 100 and two of the vibration
damper screws
-
Tighten both the screws by hand to stop in the pulley
-
Install the puller so that the claws engage in the screws, not in the camshaft pulley.
Note! Ensure that the tool claws do not damage the pulley teeth.
When only replacing the front crankshaft seal
-
Remove the old seal using a groove-cut chisel or: 999 5919 PULLER See: Tools and Equipment/999 5919 Puller
-
Clean the mating surface
-
Grease and install a new seal.
Use tool 999 5455 PUNCH See: Tools and Equipment/999 5455 Punch
-
Press in the seal using a drift and the crankshaft center nut as illustrated.
Note! Ensure that the crankshaft does not rotate when pressing in the crankshaft seal.