S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Intake Manifold Gasket: Procedures
Replacing The Intake Manifold And Gasket
Special Tools:
951 2666
Note: As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.
Preparation
Remove the front engine cover if applicable.
Disconnect the battery negative lead. First read Note when disconnecting and connecting the battery lead.
Drain the fuel injection system. See: Powertrain Management/Fuel Delivery and Air Induction/Service and Repair/Draining the Fuel Injection System
Removing the fuel rail
Remove:
-
the cover over the ignition coils
-
the crankcase ventilation hose from the top of the cam cover
-
the cover over the throttle body (TB)
-
the protective cover over the nozzle connectors
-
the connectors from the nozzles
-
the vacuum hose for the fuel pressure regulator from the throttle body (TB).
Removing the fuel line
Disconnect the quick-release connector between the fuel line and the fuel rail. Use tool 951 2666.
Remove the mounting screws from the fuel rail.
Gently work the fuel rail and injector nozzles loose as a single unit.
Removing components