S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Tighten nuts to 32 Nm (24 ft.lbs.), starting from the center and working toward the outside of exhaust manifold.
NOTE:
Ensure that exhaust components are not under stress during installation.
Carry out a function and leak test.
Install the heat deflector plate on the exhaust manifold.
Tighten to 25 Nm (18. ft.lbs).
WARRANTY STATEMENT:
Claims may be submitted under the New Car Warranty when there is a documented customer complaint, using claim type 01.