S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Removing The Damper Motor Housing For The Air Distribution
-
Switch off the ignition.
-
Remove the soundproofing panel on the driver's side.
-
Twist the clip. Pull out the stay from the lever.
-
Remove the connector and the three screws.
-
Remove the motor.
Installing The Damper Motor Housing For Air Distribution
NOTE: Before installing the damper housing motor for air distribution the damper housing motor must be adjusted.
Install:
-
the motor
-
the three screws
-
the connector
-
the stay on the lever.
If necessary adjust the position of the lever.
Self-adjust the damper housing motor position.
Install the soundproofing panel on the driver's side.
Recirculation
Recirculation, Replacement
Removal