S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
-
Remove the clutch driven plate.
-
Remove the snap ring
-
Remove the spacer ring from the shaft
-
Install the special tool 999 5604 in the socket.
Turn the tool 90 degrees
-
Pull the spacer ring sleeve out to the right
NOTE: Clean all components with compressed air and a lint-free cloth.
-
Check whether any components are worn or dirty. This is particularly important if remnants of the spacer ring remain.
HINT: Replace the spacer ring.
Installing The Spacer Ring