S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Center Mounted Brake Lamp: Removal and Replacement
Replacing High Level Stop (Brake) Lamp
Replacing high level stop (brake) lamp
Replace brake lamp
-
Remove the cover (first pull it backward out of the clips, and then down).
-
Remove two mounting screws from the bulb holder.
-
Disconnect the connector.
-
Remove the bulb holder.
Note! If necessary press the bulb holder away from the bodywork with a screwdriver.
Install in reverse order.
-
Check the function.
Replacing The High Level Stop Lamp
Replacing the high level stop lamp
Removal