volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 14457 > < Procedures
Page 2
background image

Remove: 

-

the two screws securing the fender liner

-

the screw securing the bumper at the fender.

Replacing the rear side marker lamps 

-

Pull the bumper out a few centimeters

-

Push in the clamp for the side marker lamp at the rear. Remove the side marker lamp.

Hint:  The side marker lamp must always be replaced as one unit.

Install in reverse order.
Check that the side marker lamp is functioning.

Front Turn Signal Lamps and Side Turn Signal Flashers, Replace

Turn signal lamps 

-

Slacken off the screw holding the lamp two turns.

Procedures|Page 14457 > < Procedures