volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Fluid - M/T > < Procedures|Page 2402
Page 3
background image

-

Start the engine and let it idle. Move the gear selector through all positions, stopping in each position for 4-5 seconds.

Checking the oil level

-

See Checking and adjusting the oil, AW55-50/51SN See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and
Repair/Procedures/Checking Oil Level 

-

Switch off the engine

-

The oil capacity of the transmission is 7.4 ±0.1 liters (MAX, MIN)
Note! After replacing the transmission, the adaptation and the "Transmission oil change" counter must be reset.

-

See

Erasing diagnostic trouble codes (DTCs)

Check and erase any diagnostic trouble codes (DTCs).

Fluid - M/T > < Procedures|Page 2402