S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Remove bolts on the brackets.
Carefully remove the hose.
Install pipe
Remove seals, install new O-rings and lube with compressor oil.
Install the pipes and secure them. For tightening torques, see step Tightening torques for pipes and hoses.
Fill the cooling system
-
Diesel engines according to
-
Gasoline engines except B4184sm and B4184sjaccording to Replacing coolant See: Fluids/Coolant/Service and Repair/Removal and
Replacement.
-
Engine B4184sm according to
-
Engine B4184sj according to
Right-hand drive cars with manual transmission: Fill the reservoir for the transmission, bleed as needed.
Fill the system and check for leaks, see Filling with refrigerant See: Heating and Air Conditioning/Service and Repair/Filling With Refrigerant
Tightening torques for pipes and hoses
Pipes and hoses connected on back (A) of compressor.
Tightening torques for pipes and hoses:
-
Zexel 22 Nm.
-
Sanden 45 Nm.
-
MSC90 25 Nm.
-
Joints, pipe connections (B) 13 Nm.
-
Hoses, pipe couplings, M6, 10 Nm.
-
Hoses, pipe couplings, M8, 25 Nm.
Note! Hold pipes in place with your hand when removing and tightening to avoid damage to couplings and pipes.