S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Connect the return line to the fluid reservoir and move the new hose clamp into position and secure it.
Position the fluid reservoir. Tighten to 10 Nm.
Position the hoses in their respective hose mountings.
Reinstalling components (does not apply to B4184SM/SJ)
Reinstall the heat deflector plate on the cowl panel. Tighten the screws. Tighten to 10 Nm.
Reinstall the preheating hose if applicable.
Press the heat deflector plate into place using the clamps over the steering gear housing. Tighten the screw. Tighten to 10 Nm.
Filling/bleeding the power steering system
