S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
-
Check the rubber and the spring inside. Replace if necessary.
-
Check the spark gap: 0.7-0.8 mm.
-
Install the spark plugs. Screw the spark plugs in until the gasket is pressed against the cylinder head.
Tightening torque 25 Nm. Use special tool 999 5702 Socket See: Tools and Equipment/999 5702 Socket.
-
Position the ignition coils. Press the ignition coils into place.
-
Tighten the screw. Tightening torque 10 Nm.
-
Connect the high tension cables.
-
Reconnect the connectors.
Note! The gray connector is for the left coil (cylinders 2 and 3), the blue connector is for the right coil (cylinders 1 and 4).
-
Check the function.
-
Install both engine covers.