S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
A/C Signal: Service and Repair
Replacing The Air Conditioning (A/C) System Pressure Sensor
Removing the air conditioning (A/C) system pressure sensor
Drain the air conditioning (A/C) system.
Note: Clean the area around the sensor.
-
Remove the battery clamp if necessary.
-
Disconnect the connector.
-
Remove the sensor.
Installing the air conditioning (A/C) system pressure sensor
-
Use a new sealing ring. Lubricate the sealing ring with compressor oil.
-
Install the temperature sensor. Tighten the temperature sensor. Tightening torque 18 Nm.
-
Reconnect the connector.
-
Reconnect the battery clamp.
-
Fill the air conditioning (A/C) system.