S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
-
Remove the flame guard housing by twisting it approximately 15 mm counter-clockwise (bayonet socket)
-
Remove the flame guard (if installed)
NOTE: A flame guard is not required.
-
Blow the hose clean in the direction of the crankcase ventilation
-
Fill with new engine oil.
CAUTION: Do not disconnect the hoses from the flame guard cover. The position of the hose can affect the throttle function.
-
Install a new O-ring. Install the flame guard housing.
Turbocharged Engines, at The Turbocharger (TC)
