S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Fuel Filler Hose: Removal and Replacement
Replacing fuel filler pipe
Removing fuel filler pipe
Warning! Protective gloves and protective goggles should be used for the following operations because of the risk of fuel spillage
-
Partially drain the fuel system, see Draining the fuel injection system See: Service and Repair/Draining the Fuel Injection System
-
Remove the filler cap
-
Remove the leak diagnostic filter see Replacing the leak diagnostic filter
-
Pull out the rubber seal and drain hose
-
Remove three bolts
-
Raise the car. Clean the fuel tank hose connector (B)
-
Remove hose clamps on the side of the fuel filler pipe (B) and the bolt on the side member (C)
-
Remove the leak diagnostic pump line from fuel filler pipe. Press in lock and pull
-
Remove the line from Evap canister. Press in lock and pull
-
Remove fuel filler pipe together with hoses.
Installing fuel filler pipe