S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Remove:
-
the casing over the injection valves (2 screws)
-
the connector from the boost pressure sensor.
Blow clean with compressed air around the boost pressure sensor.
Remove:
-
the screw for the boost pressure sensor
-
the boost pressure sensor.
Installation
Installing the pressure sensor
Install:
-
a new boost pressure sensor
-
the screw for the boost pressure sensor
-
the connector for the boost pressure sensor
-
the casing over the injection valves (2 screws).
