S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Install the rubber washer, lock washer and the nut on the gear shift linkage rod connection.
Tighten the nut.
Lock the nut with the lock washer.
Adjusting the gear-shift position sensor
See Checking and adjusting the gear-shift position sensor, AW55-50/51SN See: Adjustments.
installing the cable harness on the transmission
-
Position the cable harness
-
Press the connector into place on the bracket
-
Connect the connectors
-
Secure the cable harness using 2 cable ties
-
Position the fusebox and screw it into place.
Installing the gear-shift position sensor, continued