S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Be sure to protect the surrounding components from heat. Position the splice sleeve in nozzle 9512779 and heat the joint so that the adhesive melts and
begins to emerge from each end.
E. Final Check
E.
Final Check
Checking function
1
Switch on the ignition.
Caution!
Ensure that nobody is in the car when the battery is connected.
Connect the battery negative lead.
Wait at least 10 seconds.
Enter the anti-theft radio code.
Set the clock.
Reading and erasing diagnostic trouble codes (DTCs)
2
Read out and erase any diagnostic trouble codes (DTCs). Switch of the ignition.
Turn the ignition to position II and check that the SRS control lamps goes out after a few seconds.
