S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Impact Sensor: Removal and Replacement
SIPS Sensor (B-Post)
SIPS sensor (B-post)
Preparing the vehicle
Prepare the car according to Note when disconnecting and connecting the battery lead See: Starting and Charging/Battery/Service and
Repair/Procedures/Battery, Disconnecting.
Removing the SIPS sensor (B-post)
Remove:
-
the lower B-post panel according to Lower B-post panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Removal
and Replacement/Lower B-Post Panel
-
the foam carefully
-
the two screws.
Carefully unhook the catch. Remove the connector.
Note! Do not pull the cable.
Note! Check that no pins are damaged on the sensor and connector.