volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Sensors and Switches - Starting and Charging > < Procedures|Page 1915
Page 4
background image

Install:

-

the connector and check the locking

-

the two screws. Tighten to  6 Nm

-

the side cushion and screw.

Fold back the backrest and the seat cushion.
Install the rear sill trim panel according to  Rear sill trim panel See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair/Rear Sill
Trim Panel.

Finishing work

Prepare the car according to  Note when disconnecting and connecting the battery lead See: Starting and Charging/Battery/Service and
Repair/Procedures/Battery, Disconnecting.
Read off the diagnostic trouble codes (DTCs) via VIDA. Erase the diagnostic trouble codes (DTCs).

Sensors and Switches - Starting and Charging > < Procedures|Page 1915