S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Install the pipe clamp using the screw (A).
Slide the pipe clamp (B) over the rubber and align the clamp for securing. Place the pipe clamp directly opposite the threaded hole. B4184SM/SJ:Insert
and finger tighten the screws.
Does not apply to B4184SM/SJ:Press the heat deflector plate with the clamps into place over the steering gear housing. Position the pipe clamp (B)
directly opposite the hole and finger-tighten the screw.
Tighten the nut for the pipe connection on the steering gear housing. Tighten to 15 Nm.
Tighten the pipe clamps: M6 10 Nm, M8 15 Nm.
Does not apply to B4184SM/SJ:Secure the cable for the heated oxygen sensor (HO2S) to the pipe clamp (A) before tightening.
Reinstalling components (Does not apply to B4184SM/SJ)
Reinstall the heat deflector plate on the cowl panel. Tighten the screws. Tighten to 10 Nm.
Installing the delivery line on the power steering pump (does not apply to B4184SM/SJ)
