S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Note! The link for the anti-roll bar can be replaced without removing the anti-roll bar.
Remove the nut by locking the ball joint with an Allen key.
Install the link on the anti-roll bar
Note! To ensure that there is no exhaust leakage, see: Flanged joint, assembling See: Engine, Cooling and Exhaust/Exhaust System/Exhaust
Pipe/Service and Repair/Removal and Replacement/Flanged Joint, Assembling.
Install new nuts on the ball joint.
Tighten to 45 Nm.
Install anti-roll bar