S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Suspension Strut / Shock Absorber: Removal and Replacement
Spring Strut And Spring Front, Replacing
Spring strut and spring front, replacing
Special tools:
951 2911 Hydraulic piston See: Tools and Equipment/951 2911 Hydraulic Piston
951 2914 Claw See: Tools and Equipment/951 2914 Claw
951 2915 Hydraulic hose See: Tools and Equipment/951 2915 Hydraulic Hose
951 2564 Hydraulic tool See: Tools and Equipment/951 2564 Hydraulic Tool
999 5500 SOCKET UPPER NUT REAR SHOCK ABSORBER See: Tools and Equipment/999 5500 Socket Upper Nut Rear Shock Absorber
999 5576 HYDRAULIC PUMP See: Tools and Equipment/999 5576 Hydraulic Pump
999 5758 Wrench See: Tools and Equipment/999 5758 Wrench
Removing the spring strut
Note! From model year 2001, the spring type installed in the car is shown on the car identification plate. For information about the car spring
type, see Identifying the chassis type See: Application and ID.
Raise the car. Remove the wheel.
Remove:
-
the clamp and brake hose from the bracket
-
the ABS cable from the bracket
-
the anti-roll bar link from the spring strut
-
the two screws for the wheel spindle
-
the wheel spindle from the spring strut
-
the three nuts. Remove the spring strut.
Assembling the special tool