S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Trailing Arm Bushing: Service and Repair
Front rubber bushing in trailing arm, replacing
Special tools:
999 5575 PULLER CYLINDER USED WITH HYDRAULIC PUMP -5576 See: Tools and Equipment/999 5575 Puller Cylinder Used With Hydraulic
Pump -5576
999 5588 Puller rod See: Tools and Equipment/999 5588 Puller Rod
999 5669 Press tool See: Tools and Equipment/999 5669 Press Tool
Removal
Releasing the front side of the trailing arm
Remove the protective cover for the fuel filter. Remove the bracket for the parking brake cable. Disconnect the cable harness for the ABS system from
the mounting.
Disconnect the tie rod in front of the toe-in for the trailing arm.
Position a support under the bodywork so that the tire just touches the ground but cannot be rotated.
Remove the screw from the front bushing.
Pull down and secure the trailing arm.
Removing the front rubber bushing from the trailing arm
