S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Connect the connectors to the solenoids.
Reinstall according to Replacing the cable harness for the control system, AW55-50/51SN See: Automatic Transmission/Transaxle/Wiring
Harness/Service and Repair.
Replacing the control system
Preparations
Remove according to Replacing the cable harness for the control system, AW55-50/51SN See: Automatic Transmission/Transaxle/Wiring
Harness/Service and Repair.
Remove:
-
the connectors for the solenoid valves
-
the screw for the oil temperature sensor holder. Remove the sensor from the control system
-
the cable harness from the holders on the control system.
Push the cable harness to one side.
Removing the control system
Remove the screws from the control system. Remove the cover from the transmission.
Note! Ensure that there are no cracks on the top of the lever for the gear selector slider.
