S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Installing a new sealing ring on the oil pump
Use drift 999 5117.
Note: Drift 9995117 has been modified according to the Workshop Guide.
Installing the torque converter
Lubricate the torque converter throat with ATF oil.
Note: Take care not to damage the oil pump during installation.
Make sure torque converter is as far into the transmission as possible. Check with a ruler.
The distance between the cover and retaining tabs must be approximately 14 mm.
Installing the transmission
Install the transmission.