S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Use extractor 999 5069 EXTRACTOR See: Tools and Equipment/999 5069 Extractor.
Installation
Installing a new sealing ring on the oil pump
Use drift 999 5117 PUNCH See: Tools and Equipment/999 5117 Punch.
Note! Drift 9995117 has been modified according to the Workshop Guide.
Installing the torque converter
Lubricate the torque converter throat with ATF oil.
Note! Take care not to damage the oil pump during installation.
Make sure torque converter is as far into the transmission as possible. Check with a ruler. The distance between the cover and retaining tabs must be
approximately 14 mm.
Installing the transmission
Install the transmission according to Replacing the transmission, AW55-50/51SN See: Service and Repair/Removal and Replacement/Replacing The
