volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 5529 > < Procedures
Page 2
background image

-

Carefully press out the winter mode switch from the gear selector panel

-

Disconnect the connector.

Installation 
Install 
-

the connector

-

the winter mode switch carefully in the gear selector panel

-

the 2 lock clips. Check that the winter mode switch is functioning correctly

-

the center console.

Replacing the Gear Selector Lever and/or Indicator Panel With Boot

Replacing the gear selector lever and/or indicator panel with boot 

Removal 
Preparations  

Remove the gear selector knob. 
Remove the gear selector assembly. 
Remove the indicator panel and boot.

Removing the gear selector 
Remove 

-

The pawl (1) using round-nosed pliers

-

The spring and push rod (2) from the selector lever

-

The shaft (3) using a drift

-

The gear selector (4).

Installation 
Installing gear selector 
Install 

Procedures|Page 5529 > < Procedures