S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
-
The pawl (1). Press down the push rod and insert the pawl.
Lubricate the pawl segment using grease 1 161417-9
-
The spring and push rod (2).
Lubricate the lower section of the push rod and spring using grease 1161417-9
-
The gear selector (4) and the shaft (3) using a drift.
Replacing the boot and/or indicator panel
Install
-
The lighting strip and marker
-
The mode selector switch (W)
-
The indicator panel on the gear selector assembly.
Note: Locate the indicator in its slot on the gear selector.
Installing the gear selector assembly
Install the gear selector assembly.
Install the gear selector knob.
Replacing Gear Selector Knob
Replacing gear selector knob
Removal and Installation
Removing gear selector lever knob
Apply the parking brake.
Shift the gear selector to position N/D.