S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Install two new nuts on the wheel spindle screws.
Press the wheel spindle to the bottom. Tighten the wheel spindle screws. Tighten to 90 Nm.
Tighten the ball joint nut. Tighten to 67 Nm.
Install the tie rod ball joint on the wheel spindle
See step Ball joint tie rod, protective bellow or tie rod, replacing See: Steering and Suspension/Steering/Tie Rod/Service and Repair/Removal and
Replacement.
Install the brake caliper
