S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Install the trim strip on the top edge.
PUR
Note! Always open a side window when replacing the windshield, otherwise the windshield may move when the door is closed.
When working with PUR on the body flange, see PUR on body flange See: Body and Frame/Service and Repair/Procedures.
Cleaner H
Clean the area on the window to which PUR adhesive is to be applied with cleaner-H (black cap).
Glass activator
Apply glass activator (yellow cap) to the area on the window to which PUR adhesive will be applied.
Glass primer
Apply glass primer (green cap) to the area on the window to which PUR adhesive will be applied.
Apply generously (although not so much that it runs).
Let the primer dry until the surface is matt.
PUR adhesive activator