S40 L5-2.5L Turbo VIN 68 B5254T3 (2005)
Install the removed cables together with cable terminals. See:
- Flame sensor in positions 1 and 2 (blue and brown).
- Glow plug in positions 9 and 12 (white and brown).
- Water pump in positions 10 and 11 (brown and violet).
- Fan motor in positions 13 and 14 (black and brown).
Install:
-
the housing around the fan motor
-
the cover for the fan motor using 4 screws. Tighten
-
the cover and the pipe couplings. See: Coolant pipe fuel-powered preheater See: Auxiliary Water Pump/Service and Repair/Coolant Pipe
Fuel-Powered Preheater Coolant pipe fuel-powered preheater See: Auxiliary Water Pump/Service and Repair/Coolant Pipe Fuel-Powered
Preheater
-
the control module. See: Fuel Fired Booster Heater Control Unit See: Auxiliary Cabin Heater Control Module/Service and Repair Fuel Fired
Booster Heater Control Unit See: Auxiliary Cabin Heater Control Module/Service and Repair
-
the auxiliary heater acc. to: Fuel Fired Booster Heater See: Service and Repair/Fuel Fired Booster Heater.
Finishing
Testing the engine coolant heater
Carry out a performance test of the engine coolant heater. See: Fuel-powered preheater, checking See: Testing and Inspection/Component Tests and
General Diagnostics/Fuel-Powered Preheater, Checking.
