S40 T5 L5-2.5L Turbo VIN 68 B5254T3 (2006)
Pull up the grommet along the cable harness.
14.
Splicing the connector
Caution!
Cut one cable at a time to an appropriate length, so as the splices end up inside the grommet, and splice it with the male section of the service
cable harness.
It will be necessary to stagger the splices to allow them to fit inside the grommet.
For cable splicing, see VIDA:
Cleaning, inspection and adjustment> Electrical system > Cables and fuses> Cables