S40 T5 L5-2.5L Turbo VIN 68 B5254T3 (2006)
Finishing
Securing the cable for the SRS system
Secure the new cable for the SRS system next to the old cable using a tie strap or similar. Reinstall the connectors.
Installing the battery cable
Install the battery negative lead. See
Checking and adjusting the SRS system
Turn the ignition to position 2.
Check the SRS system to ensure that the warning lamp comes on and stays on while the SRS system performs a self-test. The lamp must go out after a
few seconds. If not, perform fault-tracing according to VIDA vehicle communication.
If everything is working, reinstall other components.
Test drive the vehicle.
