S40 T5 L5-2.5L Turbo VIN 68 B5254T3 (2006)
-
Remove fuse F2 for the power steering pump.
-
Pull up the red cable under the fuse post [1], and cut it behind the cable terminal. Isolate cut cable by wrapping with plastic tape, and press it
down into the fuse holder.
-
Remove the ground cable for the power steering pump (the larger 4 sq2 cable, behind hood strut in this photo [2]) and cut the cable terminal.
Isolate cut cable by wrapping with plastic tape.
10.
Installing the new cable harness
Install:
