S40 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
Remove the mechanical cable (1) from the lock unit.
Detach the rubber boot (2).
Pull the mechanical cable out through the hole in the door cassette.
Installation:
Installing the mechanical cable
Thread the mechanical cable in through the hole in the door cassette.
Install:
-
the mechanical cable (1) on the lock unit
-
the rubber boot (2).
Angle the door cassette into the door.
Route the cable harness in through the door.
Connect the connector.
Install:
