volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Steering Mounted Controls Assembly > < Parking Assistance Sensor Rear, Replacing|Page 20669
Page 14
background image

-

Carefully remove the switch panel. Use a scriber with an angled point. Pull out one corner of the panel using the scriber. Pull until the hooks
release. It is secured by three hooks on each long side. Continue to pull down along the panel until all the mounting hooks have released.

-

Remove the switch blank. Install the new switch (1) in any location

-

Reinstall the surround and the cover plug.

Finishing work

-

Remove the backing paper from the bumper.

Reinstall:

-

the battery if removed. Connect the battery, "+" terminal first and then the "-" terminal

-

the battery cover and holder

-

the sill trim panel for the rear cross member. Connect the cargo compartment lighting

-

the left-hand side panel

-

the cargo compartment carpet

-

Program the software. See the service information in VIDA

-

Check the function of the parking assistance system. Check that the parking assistance system can be turned off using the switch in the centre
console.

Caution! Leave the car indoors for 2 hours after carrying out the work. Do not wash the car for 48 hours.

Steering Mounted Controls Assembly > < Parking Assistance Sensor Rear, Replacing|Page 20669