S60 L5-2.4L Turbo VIN 54 B5244T5 (2005)
Caution! Ensure that the crankshaft does not rotate when pressing in the crankshaft seal.
Remove the old seal using a groove-cut chisel or: 999 5919 PULLER See: Tools and Equipment/999 5919 Puller.
Clean the mating surface.
Grease and install a new seal.
Use tool: 999 5455 PUNCH See: Tools and Equipment/999 5455 Punch.
Press in the seal using a drift and the crankshaft center nut. As illustrated.
Removing the oil pump
Remove:
-
the 4 x oil pump screws
-
the oil pump. Carefully break at the stop lugs. Use a groove-cut chisel.
Clean the gasket face and the mating surfaces.
Installation
Note! For tightening torques, see: Tightening torque See: Specifications/Tightening Torque.
Installing the oil pump