S60 L5-2.4L Turbo VIN 54 B5244T5 (2005)
Slacken off and remove the screw on the compression tool.
Note! Keep fingers away from the three clutch rivets when removing the compression tool. There is a risk of compression damage.
Remove the hooks. Remove the counterhold.
Remove the cone from the centering tool.
Slacken off the nut. Tap the centering tool lightly so that the expander releases. Use a rubber mallet. Use a rubber mallet so that the threads are not
damaged. Remove the centering tool.
Remove the flywheel gear sector.
For transmission installation, see the relevant procedure.
