S60 L5-2.4L VIN 64 B5244S6 (2003)
Hose/Line HVAC: Service and Repair
Pipes/Hoses, Replacing
Pipes / hoses, replacing
Pipes / hoses
Note! For cars with chassis numbers up to -86697, see Txv-valve and connector pipe See: Heating and Air Conditioning/Expansion
Valve/Service and Repair/TXV-Valve and Connector Pipe.
Before starting work on the compressor or magnetic clutch compressor
Warning! Follow the safety instructions for work on air conditioning systems.
Note! First read the instructions covering slow and fast leaks. See Oil in the A/C system See: Fluids/Refrigerant Oil/Service and Repair.
Note! Always plug the pipes and couplings when working on the climate control system.
Removal
Common operations
-
First read section Before starting work on the compressor or magnetic clutch compressor
-
Disconnect the battery negative lead. See Battery, replacing See: Starting and Charging/Battery/Service and Repair/Removal and
Replacement/Battery, Replacing
-
Drain the refrigerant from the system.
-
Remove the engine stabilizer brace in the engine compartment.
Remove:
-
the servo oil reservoir: Place it on top of the engine
-
the hose from the expansion tank. Clamp the hose with pliers
-
the switch for the level sensor
-
the switch at the cable duct
-
the expansion tank: Place it on top of the engine.
