volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Seat Heater Control Module > < First Generation Power Seats|Page 158
Page 2
background image

-

for first generation seats, see Lifting seats in and out See: Body and Frame/Seats/Service and Repair/Removal and Replacement. For second
generation seats, see Removing power seats, tilting See: Body and Frame/Seats/Service and Repair/Removal and Replacement.

Ordering software

Order applicable software.

Finishing

Check that no diagnostic trouble codes have been stored during the repair.
Test operate the seat. Check all the functions.

Control Module Heater Pad, Replacing

Control module heater pad, replacing

Removing the heater pad control module

Remove the seat from the car. See Removing power seats, tilting See: Body and Frame/Seats/Service and Repair/Removal and Replacement.
Remove one screw.
Disconnect the connector.
Remove the control module.

Installing the heater pad control module

Install:

-

the control module

-

the connector

-

one screw

-

the seat. See Removing power seats, tilting See: Body and Frame/Seats/Service and Repair/Removal and Replacement.

Seat Heater Control Module > < First Generation Power Seats|Page 158