volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Brake Control Module (BCM), Replacing|Page 204 > < ABS/TCS - DTC's 0076 and 0117|Page 201
Page 1
background image

Electronic Brake Control Module: Service and Repair
Brake Control Module (BCM), Replacing

Brake control module (BCM), replacing

Removal

Preparation

Note! In week 35 year 2001 a new brake control module (BCM) is being introduced along with a new sensor in the brake electronics.

Remove the battery cable. See Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.

Removing the air cleaner (ACL) housing

Remove the air cleaner (ACL) housing. See Brake pipe master cylinder / ABS unit, replacing See: Brakes and Traction Control/Hydraulic System/Brake
Hose/Line/Service and Repair/Brake Pipe Master Cylinder / ABS Unit, Replacing.

Removing the integrated relay / fusebox

Remove the integrated relay / fusebox. Remove the connector for the ABS unit. See Brake pipe from hydraulic unit / front wheel / junction, replacing  
See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and Repair/Brake Pipe From Hydraulic Unit / Front Wheel / Junction,
Replacing.
Remove the screw on the bracket.
Lift the box out of the bracket and put it to one side.

Disconnecting the connector

Brake Control Module (BCM), Replacing|Page 204 > < ABS/TCS - DTC's 0076 and 0117|Page 201