volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Relays and Modules - Cooling System > < Replacing ABS / DSTC (Dynamic Stability and Traction Control) Control Module|Page 237
Page 1
background image

Traction Control Module: Service and Repair
Steering Angle Sensor (SAS) Module, Replacing

Steering angle sensor (SAS) module, replacing 

Soundproofing panel 

Remove the driver's side soundproofing panel.

Control module 

Remove the control module by pressing the 2 catches using a finger and pulling the control module backwards (see the arrow). Remove the connector
and the cable.

Installation 

The control module

Install the cable in the holder for the control module. Press the connector into place. Reinstall the control module. Press the module into place until
there is an audible click.

Ordering software 

Order the software.

Programming the steering wheel angle sensor module (SAS) 

Program the new control module. 
The soundproofing panel Install the driver's side soundproofing panel.

Relays and Modules - Cooling System > < Replacing ABS / DSTC (Dynamic Stability and Traction Control) Control Module|Page 237