volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 1071 > < Reading and Clearing Diagnostic Trouble Codes|Page 1069
Page 55
background image

Yes - Fault Found

No - No Fault Found

-------------------------------------------------

Trouble-Shooting Information

Trouble-shooting information

Condition

-

No SWM diagnostic trouble codes are displayed in the CEM

-

No diagnostic trouble codes are displayed in the SWM.

Possible source

-

Defective indicator switch

-

Defective control unit.

Fault symptom[s]

-

Parking heater does not work.

Checking the Read and Reset Button on the Turn Signal Lamp Switch

Checking the read and reset button on the turn signal lamp switch

Checking components

Activate the read and reset button on the turn signal lamp switch. Read off the status.

Hint: If the read and reset button status is OK the fault is not in the steering wheel module (SWM).

Was the status of the read and reset button correct?

Yes - No Fault Found

No - Replacing the component

-------------------------------------------------

Replacing the component

Replace the turn signal lamp switch

Other information:

-

To replace the turn signal lamp switch, see Turn signal switch, replacing, M58, M66, M66 AWD, AW50/51 AWD, AW55-50/51SN, M56 See:
Lighting and Horns/Sensors and Switches - Lighting and Horns/Turn Signal Switch/Service and Repair/Turn Signal Switch, Replacing.

Select "Continue" when the fault has been remedied.

Continue - Checking components

-------------------------------------------------

Checking components

Activate the reset button on the turn signal lamp switch. Read off the status.

Reading and Clearing Diagnostic Trouble Codes|Page 1071 > < Reading and Clearing Diagnostic Trouble Codes|Page 1069