S60 L5-2.4L VIN 64 B5244S6 (2003)
Trouble-Shooting Information
Trouble-shooting information
Condition
-
No SWM diagnostic trouble codes are displayed in the CEM
-
No diagnostic trouble codes are displayed in the SWM.
Possible source
-
Defective indicator switch
-
Defective control unit.
Fault symptom[s]
-
Text message in combined instrument cannot be erased.
Checking the Read Button on the Indicator Switch
Checking the read button on the indicator switch
Checking the components
Activate read button on indicator switch and read status.
Hint: If read-out of status on read button gave a correct result the fault is not in the SWM.
Did read-out of status on read button give a correct result?
Yes - No Fault Found
No - Replacing the component
-------------------------------------------------
Replacing the component
Replace the indicator switch.
Additional information:
-
To replace indicator switch see Turn signal switch, replacing See: Lighting and Horns/Sensors and Switches - Lighting and Horns/Turn Signal
Switch/Service and Repair/Turn Signal Switch, Replacing.
Press Continue when fault has been repaired.
Continue - Checking the components
-------------------------------------------------
Checking the components
Activate read button on indicator switch and read status.
Hint: If read-out of status on read button gave a correct result the fault was in the indicator switch.
