volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 1108 > < Reading and Clearing Diagnostic Trouble Codes|Page 1106
Page 92
background image

FAULT-TRACING FAILED - FAULT-TRACING FAILED

Attempt New Test -  Checking the ground terminal

-------------------------------------------------

Checking the Power Supply and Ground Terminals. Permanent Fault

Checking the power supply and ground terminals. Permanent fault

Checking power supply and ground terminals

Check steering wheel module connector A. Check for contact resistance and oxidation.
Check fuse 22 in the passenger compartment fusebox for the steering wheel module.
Note! If the fuse is blown, check the circuit after the fuse. Check for a short-circuit to ground before replacing the fuse. Then replace the fuse. For further
information about the circuit after the fuse, refer to the appropriate wiring diagram.
Check the cable for power supply between fuse 22 in the passenger compartment fusebox and the control module terminals #A1 and #A6. Check for an
open-circuit.
Check the ground lead between control module #A22 and ground terminal 31/84. Check for an open-circuit. Check ground terminal 31/84. Check for
contact resistance and oxidation.
Remedy as necessary.

Other information:

-

To access and replace the control module see Steering wheel module (SWM), replacing See: Steering Column Control Module/Service and Repair

-

To access or replace the fuses, see Fusebox, passenger compartment, replacing See: Maintenance/Fuses and Circuit Breakers/Fuse Block/Service
and Repair/Fusebox, Passenger Compartment, Replacing 

-

Checking wiring and terminals.  See: Testing and Inspection/Component Tests and General Diagnostics/Checking Wiring and Terminals/Checking
Wiring And Terminals

Reading and Clearing Diagnostic Trouble Codes|Page 1108 > < Reading and Clearing Diagnostic Trouble Codes|Page 1106