volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 977 > < Reading and Clearing Diagnostic Trouble Codes|Page 975
Page 67
background image

Was the status of the turn signal lamp switch correct?

Yes - No Fault Found

No - Replacing the component

-------------------------------------------------

Replacing the component

Replace the turn signal lamp switch

Other information:

-

To replace the turn signal lamp switch, see Turn signal switch, replacing, M58, M66, M66 AWD, AW50/51 AWD, AW55-50/51SN, M56 See:
Lighting and Horns/Sensors and Switches - Lighting and Horns/Turn Signal Switch/Service and Repair/Turn Signal Switch, Replacing.

Select "Continue" when the fault has been remedied.

Continue - Checking components

-------------------------------------------------

Checking components

Activate the turn signal lamp switch. Read off the status.

Hint: If the turn signal lamp switch status is OK, the fault is in the turn signal lamp switch.

Was the status of the turn signal lamp switch correct?

Yes - Fault Found

No - Replacing the component

-------------------------------------------------

Replacing the component

Try replacing the steering wheel module (SWM).

Caution! A new control module is delivered without software. The control module must be programmed in order to function after replacement.

Other information:

-

To replace and program the steering wheel module (SWM), see Steering wheel module (SWM), replacing See: Steering Column Control
Module/Service and Repair.

Reading and Clearing Diagnostic Trouble Codes|Page 977 > < Reading and Clearing Diagnostic Trouble Codes|Page 975