S60 L5-2.4L VIN 64 B5244S6 (2003)
The ohmmeter should read approximately 0 ohms.
OK - Fault Found
Not OK - Contact Resistance And Oxidation
-------------------------------------------------
Checking for open-circuits, contact resistance and oxidation
For the control module,check ground terminal 31/84 and the wiring connected to it. Check for an open-circuit. Check for contact resistance and
oxidation.
Other information:
-
Checking wiring and terminals. Permanent fault See: Testing and Inspection/Component Tests and General Diagnostics/Checking Wiring and
Terminals/Checking Wiring and Terminals. Permanent Fault.
