S60 L5-2.4L VIN 64 B5244S6 (2003)
Press in the locking tab on the cable terminal and carefully pull out the cable and the cable terminal. Use tool 951 2812 Terminal removal tool See:
Tools and Equipment/951 2812 Terminal Removal Tool or tool 951 2637 Terminal removal tool See: Tools and Equipment/951 2637 Terminal
Removal Tool , as illustrated.
Connector, assembling
Primary locking
Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable.
Secondary locking
Press the secondary lock into place.
Connector Type 1
Connectors, repair
Special tool 951 2637 Terminal removal tool See: Tools and Equipment/951 2637 Terminal Removal Tool.
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Connector, dismantling
Secondary lock
