volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Adapter 7 to 4 Pole Wiring For Towing|Page 24517 > < Adapter 7 to 4 Pole Wiring For Towing|Page 24515
Page 43
background image

-

Fold back the carpet

-

Remove the clips at the bottom edge of the right and left folding panels (press the centre of the clips until there is a audible snap)

-

Remove the clips.

-

Turn the handle (1) on the right and left-hand sides through 

90°

-

Fold the panels inwards. Lift the panels out

-

Pull the tailgate sill trim panel (2) forwards on the right and left hand sides until the two clips on each side release. Carefully pull the panel with
some force as it is tightly secured

-

Pull the panel straight up until the four clips on the underside release

-

Remove the wiring (3) for the cargo compartment lighting

-

Lift out the sill trim panel.

-

Remove the screw (1), the nuts (2) and then the bracket (3) (pull the bracket forwards)

-

Lift off the protective cover (4).

Adapter 7 to 4 Pole Wiring For Towing|Page 24517 > < Adapter 7 to 4 Pole Wiring For Towing|Page 24515